超純水總有機碳分析監測儀器 / TOC Analyzer For Ultra Pure Water Applications
The TAC series detect a variation of conductivity generated in the stage of intermediate or carbon dioxide of complete oxidation by control and application of the exposure dose of ultraviolet radiation, the sample quantity of flow and the measurement algorithm, and by those calibration curves the TOC measurement is conducted, enabling the process control when a high speed mode in emergency and when an absolute mode when it it hard to be influenced by a trace quantity of dissolved gases in sample solution.
It is possible to measure the variation of TOC and change of water quality in approximately 30 seconds in the high-speed mode and 3 minutes in the absolute mode.
Advantages:
- Instant grasping of a change of water quality in the continuous TOC measurement.
- Easy operation and maintenance-free.
- Compact designing.
- Utilizes a conductivity sensor for precision measurement of a trace quantity of flow.
- Possible to decompose hard-degradable TOC by a high-power ultra-violet lamp.
- Uniform oxidation characteristic realized by a special chamber processing technology.
- Memory function of measurement date.
- Connectable to a printer.
- No needs for reagents and carrier gases.
By providing four types of TOC lineup, it has been made possible to carry out the TOC inline continuous measurement in ultra pure water and ultra pure water for next generation used for manufacture of semiconductors and liquid crystals, and ultra pure water for medical and pharmaceutical use (injection and preparation), The TOC off-line continuous measurement has been also possible by using an optional pump.
攜帶型連續監測總有機碳分析儀
Model: Accura-R
TOC Analyzer for Ultra Pure Water
- Principle: UV Oxidation & Conductivity Detection
- Mode: Hi Speed / Abso.
- Measuring range: 0 ~ 999.99 ppb.
- Repeatability: ± 0.1 ppb
- Resolution: 0.01 ppb
- Sample flow rate: More than 100 ml/min.
- Sample pressure: 0.3 ~ 5.0 kg/cm²
- Sample quality: > 1 M Ohm/cm
- Sample temperature: 5 ~ 50 °C
- Output: 2 sets SPDT contacts for Hi alarm / 4~20mADC analog output
Model: Accura-SX
TOC Analyzer for Ultra Pure Water – Next Generation
- Principle: UV Oxidation & Conductivity Detection
- Mode: Hi Speed / Abso.
- Measuring range: 0 ~ 30.000 ppb.
- Repeatability: ± 0.1 ppb
- Resolution: 0.001 ppb
- Sample flow rate: More than 100 ml/min.
- Sample pressure: 0.3 ~ 5.0 kg/cm²
- Sample quality: > 10 M Ohm/cm
- Sample temperature: 15 ~ 40 °C
- Output: 2 sets SPDT contacts for Hi alarm / 4~20mADC analog output
Model: Accura-H
TOC Analyzer for Pharmaceutical & Hot DI Water 藥廠專用機型
- Principle: Wet Oxidation / NDIR Detector
- Measuring range: (A) 0 ~ 2000 ppb.; (B) 0.1 ~ 20.0 ppb
- Repeatability: (A) ± 10 ppb.; (B) ± 0.1 ppb
- Resolution: (A) 5 ppb.; (B) 0.1
- Sample flow rate: More than 30 ml/min.
- Sample pressure: 0.0 ~ 5.0 kg/cm²
- Sample temperature: 5 ~ 50 °C
- Output: 2 sets SPDT contacts for Hi alarm / 4~20mADC analog output
固定設置型線上連續監測總有機碳分析儀
Model TAC-601D
On-Line TOC Monitoring System
- Principle: Wet Oxidation / NDIR Detector
- Measuring range: (A) 0 ~ 2000 ppb.; (B) 0.1 ~ 20.0 ppb
- Repeatability: (A) ± 10 ppb.; (B) ± 0.1 ppb
- Resolution: (A) 5 ppb.; (B) 0.1
- Sample flow rate: More than 30 ml/min.
- Sample pressure: 0.0 ~ 5.0 kg/cm²
- Sample temperature: 5 ~ 50 °C
- Output: 2 sets SPDT contacts for Hi alarm / 4~20mADC analog output
Optional Accessories:
- Sampling Pump
- Multi Network System
- Data Logging Software
- Prefilter System
- Transfer Unit for Multi sampling water
- Printer.
Replacement spare parts:
- UV Lamp
- Recording Chart paper